SP530
Key Features
Speaker Power Capability
• 500W / Peak 2000W (8Ω)
Sensitivity(@ 1m)
• 98dB / MAX SPL(Calculated) 134dB
Coverage
• 90° (H) x 40°(V)
2-way loudspeaker system provides high output, low distortion sound reinforcement for the entire range of pro audio applications.
Application
SP530 2-way loudspeaker system provides high output, low distortion sound reinforcement for the entire range of pro audio applications. The 320 mm (12″) low frequency cone with 75 mm (3″) voice coil and 44 mm (1.75″) voice coil high frequency compression driver provides higher output and lower distortion plus enhanced power handling capabilities for better performance in both portable and permanently installed applications. LSS’s advanced crossover incudes professional protection of HF. The SP530 offers a switchable powering mode: full range or Bi-Amp passive operation using the internal crossover filter network.
The SP530 was designed to support a wide range of pro audio applications. While ideal for distributed systems, the 13° per side trapezoid angles match the 90° horizontal coverage pattern allowing the creation of tight packed clusters. The pole mount cup and balance-optimized handles allow for quick and easy load-in for portable use. Its high output capabilities let it act as a main system for smaller concert or portable A/V events or even provide front or side fill for concert touring applications. The comprehensive system mounting points permit safe suspension in permanent installations.
• 320 mm LF shielded in vented enclosure
• Fly mounting points and pole mount cup included
• Powering mode Full Range or Bi-Amp (with Internal Passive Crossover)
• For portable use or permanent installation
Performance
Frequency Response
• ±5 dB 55 Hz to 18 KHz
• -10 dB 45 Hz
Speaker Power Capability
• 500W / Peak 2000W (8Ω)
Sensitivity(@ 1m)
• 98dB / MAX SPL(Calculated) 134dB
Nominal Input Impedance (Ohms)
• Full Range Passive 8
• LF 8
• HF 16
Coverage
• 90° (H) x 40°(V)
ADDITIONAL DATA
Product Series SP
• LF Subsystem & Loading One 320 mm (12″) woofer vented
• HF Subsystem & Loading One 75 mm (3″) exit/44 mm (1.75″) voice coil Titanium/ Ferrite
• Crossover two-way 12/18 dB
• Sistem Protection HF
• Operating Mode Full Range or Bi-Amp (with Internal Passive Crossover)
Physical
Dimensions mm (±1 mm)
• Height 590
• Front Width 390
• Rear Width 195
• Depth 395
• Trapezoid angles (degrees) 13° per side
Weights Kilograms
• Net Weight 21
• Shipping Weight 23
• System Configuration Two-way full range
Enclosure Material
• Enclosure material: Birch Plywood of 18 mm
• Finish: Texture poliuretanic black paint
• Suspension: 12 point mounting suspension
• Grille: Poweder coated perforated steel
• Connectors: Two Neutrik NL4 speakon
• Optional Accessories: Fly clip with ring, Speaker Soft Bag